| KM650824G01/KM650824G03 BRAKE, MX10 EU KON* PARTS AND KON* BRAKE | Basic Load Rating, Dynamic Rating(N):25700; Cover Type:No; Nominal Number:Light groove-shaped; Bearing Unit, Type:Take-Up Type; Days to Ship:Quote; Basic Load Rating, Static Rating(N):15300; d:35; Bearing Inner Dia. Shape:Cylindrical Bore Set; Lubrication method:Oil Supply Type; Unit, Type:[Framed Bearing Unit; |
| KONE elevator inverter KDL inverter KDL16R KM968094G03 | B:132mm; d:190mm; Cage Type:Brass; Static Load Rating (kN):2830; Dynamic Load Rating (kN):2380; D:400mm; Weight:80.90 KGS; Clearance:Standard; SKU:22338embw33w94a-timk; Availability:In Stock; |
| Kone Elevator Parts,KM89717G06 MOTOR,GEARED DOOR D1,Now replaced by KM606760G02 | Basic Load Rating, Static Rating(N):246000; Bearing Inner Dia. Shape:Tapered hole adapter; Pillow Type, Category:Thick Wall; Seal:Nitrile; Accessory:With cast iron cover; Surface Treatment:No; Basic Load Rating, Dynamic Rating(N):253000; Fit:J7; |
| Kone elevator door motor KM601370g03 | B1:40 mm; C0:22.9 kN; Designation of housing:PAE210N-; Adapter sleeve reference:HLK2310; H2:115 mm; L1:33.5 mm; T min.:-20 °C; N:M16; J:101.6 mm; E:20 mm; |
| KONE elevator brake MX06 KM616260G01+G02 | Holder Surface Treatment:Clear Anodize; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Days to Ship:7 Days; Width T(mm):9; RoHS:6; Bearing Part Number:6804; Flange O.D. H(φ):60; Housing Material:[Aluminum Alloy] 201; |
| Kone Elevator sensor KM86420G01,lift sensor | T min.:-20 °C; B:65.1 mm; P:300 mm; s1:32.55 mm; A5:39.7 mm; Designation of open end cover:SCOU212-39; S:25.4 mm; SW:4.76 mm; Designation of bearing:UC212-39G2; Z:60.8 mm; |
| V3F16L KM769900G01 KONE inverter | Characteristic rolling element frequency, BSF:5.93 Hz; Characteristic cage frequency, FTF:0.42 Hz; Characteristic outer ring frequency, BPF0:4.6 Hz; Nlim (grease):24,000 rpm; da max:12.5 mm; ra max:0.3 mm; Fatigue limit load, Cu:0.04 kN; Dynamic load, C:1.83 kN; d:10 mm; Brand:NTN; |
| Elevator PCB, KM769850G01, Elevator parts | G:M6x1; A2:56.7 mm; N:19mm; A4:36 mm; Z:73.1 mm; C0:32.8 kN; Designation of closed end cover:SCC212; L:195 mm; s1:32.55 mm; Recommended tightening torque for set screw:16.8 Nm; |
| KM950278G02 for KONE KDL16L inverter KM950278G01 | d:30; Inner/Outer Ring Material:Steel; Preload Mark:C3; Grease symbol:/5K; Specifications/Environment:Standard; Types:16**/6*** series; Type:Ball; D:42; Rolling Element Material:Steel; Retainer Type:Punching; |
| KDL16L DRIVE INVERTER KM953503G21 | D:80 mm; B:34 mm; C:18 mm; G:5/16-24UNF; T min.:-20 °C; S:9 mm; SW:3.97 mm; r:1.1; C0:18.2 kN; Recommended tightening torque for set screw:8 Nm; |
| Elevator LCECPU561 Main Board KM773390G03 KM773390G04 KM773393H06 for Ko | L1:70 mm; A2:28 mm; S:15.9 mm; Z:52.5 mm; H1:89 mm; G:M6x1; T min.:-40 °C; N:22mm; SW:3.18 mm; L3:57 mm; |
| Kone diagnostic tool KM878240G01 Kone service tool Kone parts | d:60 mm; Designation of housing:PAE212N-; L:150 mm; E:20 mm; S:25.4 mm; A:60 mm; Weight:4.13 kg; G:R1/8"; C:52.5 kN; T max.:100 °C; |