| 71819ACD/P4DGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,25 Degree Contact Angle | N4:4 mm; Housing material:Cast iron; DN:6.5 mm; Thread grub screw G2:3/8-24 UNF; GN:1/4-28 SAE-LT; B:51.6 mm; J6:187 mm; Fatigue load limit Pu:0.98 kN; J7:19 mm; Mass bearing unit:2.82 kg; A5:33 mm; L:203 mm; Recommended diameter for attachment bolts, mm G:16 mm; A:54 mm; J max.:165 mm; SWN:7 mm; Recommended tightening torque for grub screw:16.5 N·m; A1:34 mm; Limiting speed:4000 r/min; H1:57.2 mm; |
| 7019CEGA/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | H2:41.275 mm; Ca:49.809 mm; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt:1/2-13 UNC; P60°:141 kN; Stabilizing ring:SR-18-15; H1:101.6 mm; P150°:48 kN; Initial grease fill:141.75 g; H:196.85 mm; A1:98.425 mm; Taconite seal:TER 186; Mass pillow block:31.3 kg; L:349.25 mm; Cap bolt, SAE grade:8; P180°:58.7 kN; Pa:10.9 kN; S:4.763 mm; Da:160 mm; R1:60.325 mm; |
| 7028CDGB/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Accessories:Without Accessories; B:24.00 mm; d:140.000 mm; Grease Speed Rating Open/Shielded n1:3200 rpm; Basic Static Radial Load Rating Co:71000 N; Sealed Speed Rating n3:2000 rpm; D:190.0000 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:66300 N; Oil Speed Rating Open/Shielded n2:3800 rpm; |
| 7222ACDGB/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7200 Series,25 Degree Contact Angle | r3,4 min.:0.6 mm; Ball diameter Dw:7.938 mm; r1,2 min.:1.1 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor e:0.68; Static axial stiffness, preload class B:200 N/µm; d2:70.6 mm; B:18 mm; Calculation factor fHC:1.01; Mass bearing:0.4 kg; a:27.3 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; Fatigue load limit Pu:0.52 kN; D2:85.4 mm; Preload class C GC:870 N; |
| 7020ACD/P4ADGB SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | Sealed Speed Rating n3:26000 rpm; d:6.000 mm; Basic Static Radial Load Rating Co:950 N; Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:43000 rpm; D:19.0000 mm; Accessories:Two Seals; Grease Speed Rating Open/Shielded n1:36000 rpm; B:6.00 mm; Basic Dynamic Radial Load Rating C:2210 N; |
| 71922CD/P4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,15 Degree Contact Angle | A1:88.9 mm; Housing:FSAFS 516; PosiTrac Plus contact element:2 x B10724-44; Ca:42.799 mm; Appropriate attachment bolt size G:0.625 in; PG:1/8 NPT; Da:140 mm; A2:133.35 mm; S:4.763 mm; Stabilizing ring:SR-16-13; P120°:49.8 kN; Mass pillow block:20.9 kg; L:330.2 mm; RG:3/8 NPT; da:68.263 mm; ba:34.131 mm; R1:53.181 mm; H1:88.9 mm; Initial grease fill:87.885 g; H:174.625 mm; |
| 7220ACDGA/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7200 Series,25 Degree Contact Angle | Grease Speed Rating Open/Shielded n1:2400 rpm; D:240.0000 mm; Oil Speed Rating Open/Shielded n2:3000 rpm; Sealed Speed Rating n3:1600 rpm; Basic Dynamic Radial Load Rating C:143000 N; B:38.00 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:143000 N; Accessories:Without Accessories; d:160.000 mm; |
| 71830ACD/P4DGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,25 Degree Contact Angle | C2:2.8 mm; B:16 mm; Calculation factor f2B:1.04; d:80 mm; Calculation factor f:1.19; Preload class A GA:195 N; r3,4 min.:0.3 mm; ra max.:1 mm; Db max.:108 mm; Calculation factor f2C:1.07; Basic dynamic load rating C:21.2 kN; Number of balls z:24; b:2 mm; dn:91.5 mm; Calculation factor (single, tandem) Y0:0.38; Calculation factor (back-to-back, face-to-face) Y1:0.92; Da max.:105.4 mm; C1:8.6 mm; Static axial stiffness, preload class C:281 N/µm; |