| 7028CDGA/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | A5:20.5 mm; Db2:70 mm; Rα:45 °; Basic dynamic load rating C:14 kN; J6:81 mm; H:124 mm; Db1:65 mm; Housing material:Cast iron; A3:3.2 mm; A:30 mm; Recommended diameter for attachment bolts, inch G:0.375 in; RG:1/4-28 UNF; L:70 mm; Recommended tightening torque for grub screw:4 N·m; Hexagonal key size for grub screw N:3.175 mm; N:11.5 mm; B1:31 mm; Thread grub screw G2:1/4-28 UNF; Fatigue load limit Pu:0.335 kN; |
| 7028ACD/P4ADGB SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | Basic Radial Load Rating-Static SCO:204000 N; Type:300-RDM Series (from; D:225.0000 mm; d:105.000 mm; Fillet Radius rb:1.00 mm; Basic Radial Load Rating-Dynamic DC:229000 N; Speed Rating-Open and Shielded-Oil OSO:9500 rpm; B:49.00 mm; Speed Rating-Open and Shielded-Grease OSG:6400 rpm; Fillet Radius ra:2.50 mm; |
| 7028CD/P4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | D:270.0000 mm; Fillet Radius ra:2.50 mm; Grease Speed Rating n1:1700 rpm; Basic Dynamic Radial Load Rating C:216000 N; Fillet Radius rb:1.00 mm; B:45.00 mm; Oil Speed Rating n2:2400 rpm; Basic Static Radial Load Rating Co:260000 N; d:150.000 mm; |
| 7022CD/P4ATBTA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Basic dynamic load rating C:25.5 kN; Recommended diameter for attachment bolts, mm G:12 mm; L:118 mm; Fatigue load limit Pu:0.655 kN; Bearing:YAR 207-107-2RF/VE49; Recommended diameter for attachment bolts, inch G:0.5 in; Recommended tightening torque for grub screw:6.5 N·m; Limiting speed:3200 r/min; A:35 mm; Housing material:Composite for food a; J:92 mm; Mass bearing unit:0.72 kg; B:42.9 mm; |
| 71821CD/P4DGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,15 Degree Contact Angle | Grease Speed Rating Open/Shielded n1:9000 rpm; Basic Static Radial Load Rating Co:19300 N; Fillet Radius ra:1.50 mm; Accessories:Two Seals & Snap-Rin; d:25.000 mm; B:21.00 mm; Oil Speed Rating Open/Shielded n2:11000 rpm; Basic Dynamic Radial Load Rating C:35800 N; D:80.0000 mm; Sealed Speed Rating n3:6400 rpm; |
| 71919CDGB/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,15 Degree Contact Angle | B:16.5 mm; Mass inner ring:0.011 kg; r, r1,2 min.:0.3 mm; F:20 mm; d:17 mm; |
| BTM100A/P4CDBA SKF Brands,All Brands,SKF,Super Precision Angular Contact Thrust,BTM | Max. speed for Taconite seal:950 r/min; PG:1/8 NPT; da:77.787 mm; Housing:SAFS 518; P90°:84.5 kN; Ca:49.809 mm; R1:60.325 mm; H1:101.6 mm; A2:206.375 mm; h:38.1 mm; End plug (suffix Y):EPR 11; Cap bolt:1/2-13 UNC; L:349.25 mm; Mass pillow block:30.8 kg; J max.:295.275 mm; ba:40.481 mm; Initial grease fill:141.75 g; Cap bolt recommended tightening torque:149.1 N·m; Pa:10.9 kN; Cap bolt, SAE grade:8; |
| 71819ACD/P4DGB SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,25 Degree Contact Angle | Tolerance housing:H7 m/s; Specific static load factor K0:120 N/mm²; Permissible sliding velocity v min.:0 m/s; D:32 mm; Coefficient of friction µ max.:0.15; Permissible sliding velocity v max.:1 m/s; d:28 mm; Mass bushing:0.04 kg; Tolerance shaft:f7 m/s; Specific dynamic load factor K:40 N/mm²; Coefficient of friction µ min.:0.08; B:25 mm; |