| 548285 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Da (max):105 mm; ra (max):1 mm; da (min):85 mm; Dynamic Load Rating:27,600 N; d:80 mm; B:16 mm; Factor fo:16.4; Radial Clearance:0.025 to 0.051 mm; Static Load Rating:25,300 N; Bore Type:Cylindrical Bore; Configuration:Single Row; Limiting Speed - Grease:5,700 rpm; D:110 mm; Enclosure:Double Shield; Weight:0.363 kg; Fillet Radius/Chamfer:1 mm; |
| 512250Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Cup Part Number:153100; Cg - Geometry Factor:0.129; Design Units:Imperial; r - Cup Backface To Clear Radius1:0.250 in; e - ISO Factor2:0.32; C - Cup Width:2.2500 in; Da - Cup Frontface Backing Diameter:9.09 in; Series:153000; Y - ISO Factor3:1.87; Db - Cup Backface Backing Diameter:8.86 in; D:10.0000 in; |
| FAG 528562 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Bore Type:Cylindrical bore; Outside Diameter D:1.575 in; O.D. Type:Cylindrical OD; Dimension B1:1.126 in; Radius r:0.6 mm; Angle between Set Screws:90 ยบ; Lubrication Type:Relubricatable; Dimension B2:0.531 in; Material:Bearing Steel; Static Load Rating:1070 lbf; Dimension S1:22.1 mm; Seal Type:Molded Shroud; Weight:0.50 lb; Inner Ring Width B:19.05 mm; Bearing Type:Ball Bearing; Center of Bearing from End S:6.5 mm; |
| FAG 528876 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Dx (min):188 mm; Da (max):173 mm; Bore Type:Cylindrical Bore; ra (max):1.5 mm; Static Load Rating:67,000 N; Configuration:Single Row; Cy (max):5.1 mm; Limiting Speed - Grease:3,500 rpm; Weight:1.810 kg; Factor fo:16.4; Dynamic Load Rating:65,000 N; b (min):1.9 mm; B:24 mm; Snap Ring Outside Diameter:186.5 mm; D1 (max):176.8 mm; Enclosure:Single Shield with S; Snap Ring Width:1.7 mm; r1:0.5 mm; a (max):3.7 mm; |
| NSK 320TFD4401 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Axial Load Factor Y2:4.44; Limiting Speed - Oil:2,900 rpm; Bore Type:Tapered Bore; D:210 mm; Dynamic Load Rating:585,000 N; Center Guidance:Floating Steel Ring; Da (max):200 mm; d:140 mm; Radial Clearance:0.120 to 0.160 mm; Roller Profile:Symmetric; Retainer Material:Pressed Steel; da (min):150 mm; B:53 mm; Axial Load Factor Y1:2.98; Groove Width A:10 mm; ra (max):2 mm; Hole Diameter (do):5 mm; Constant e:0.23; |
| FAG 52201 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Ca90 - Dynamic Thrust Rating (90 million revolutions)6:30300 lbf; R - Cone Frontface To Clear Radius1:0.130 in; Series:M249700; Y1 - ISO Factor9:2.03; C - Cup Width:2.1250 in; Cup Part Number:M249710X; Cg - Geometry Factor11:0.153; da - Cone Frontface Backing Diameter:10.73 in; Cage Type:Stamped Steel; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:92800 lbf; Db - Cup Backface Backing Diameter:13.19 in; |
| FAG 5634 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D:340 mm; Fillet Radius/Chamfer:4 mm; db (min):208 mm; dc (min):234 mm; ra (max):3 mm; Limiting Speed - Grease:1,800 rpm; db (max):227 mm; Inside Ring Outside Diameter:231 mm; Enclosure:Open; B:55 mm; r1:4 mm; Dynamic Load Rating:555,000 N; Static Load Rating:770,000 N; Configuration:Single Row; d:190 mm; dd (min):247 mm; Da (max):322 mm; Bore Type:Cylindrical Bore; ra1 (max):3 mm; Radial Clearance:0.140 to 0.195 mm; |
| SKF 350916D DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | C90 - Dynamic Radial Rating (90 million revolutions)4:4060 lbf; Da - Cup Frontface Backing Diameter:66.50 mm; Cone Part Number:26132; Bearing Weight:0.4 Kg; e - ISO Factor8:0.36; D:76.2 mm; a - Effective Center Location3:-4.1 mm; db - Cone Backface Backing Diameter:40.39 mm; Series:26000; da - Cone Frontface Backing Diameter:38.61 mm; Cup Part Number:26300; Y - ISO Factor9:1.67; G2 - Heat Generation Factor (Rib-Roller End):10.1; |